solid state devices, inc. svr1118 series 14830 valley view blvd * la mirada, ca 90638 phone: (562) 404-7855 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com features: ? replacement for lt1118 types ? eutectic die attach ? regulates while sourcing or sinking current ? ultra low power shutdown mode ? stable for any c load > 0.22 : f ? fast settling time ? isolated hermetically sealed power package ? high thermally conductive package ? reduced heatsinking required ? 150 o c operating temperature ? custom lead forming available ? class h or k (space) screening available ? radiation tolerant devices are available designer's data sheet note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. svr005a data sheet #: 800 mamps /2.5 thru 5volts fixed low dropout linear voltage regulator maximum ratings symbol units value -0.2 to 7 v v in input voltage v cc 15 svr1118 - 2.5 j db h part number /ordering information 1/ screening 2/ : _ = not screened h = high rel level k = space level r = radiation tolerant lead bend: 3/ _ = straight db = down bend ub = up bend z = z bend package: 4/ j = to-257 g = cerpack s.5 = smd.5 -28= lcc 28 voltage: 2.5 = 2.5v 2.85= 2.85v 5 = 5v to-257 (j): cerpack (g): smd.5 (s.5): lcc 28 (-28): supply voltage v v out -0.2 to v cc + 0.5 v t op -55 to +150 o c operating temperature t stg -65 to +150 o c storage temperature pin assignment gnd package pin 2 pin 1 to-257 (j) base pin 1 cerpack (g) pin 1 pin 2 smd.5 (s.5) vin pin 3 pin 2 pin 3 vout for package outline request following documents package document to-257 (j, jdb, jub) 60-0149-504 cerpack (g, gzb) 60-0149-366 smd.5 (s.5) 60-0149-507 lcc28 (-28) 60-0149-342 5 - 11 1, 15 - 28 lcc 28 (-28) 2, 3, 13, 14 output voltage
solid state devices, inc. svr1118 series 14830 valley view blvd * la mirada, ca 90638 phone: (562) 404-7855 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com electrical characteristics 4/ symbol units max quiescent current quiescent current in shutdoun enable input threshholds output voltage line regulation (i out = 0a) load regulation 6/ dropout voltage 7/ ripple rejection load transient settling time a v = 25v; c load =1 : f output short circuit current thermal shutdown junction temperature enable turn-on delay 1.0 10 -- 2 2.53 2.55 2.88 2.91 5.05 5.10 6.0 6.0 10 10 10 10 10 25 25 1.1 1.3 -- -- -- -- - 400 -- -- ma : a v v v v v v v v mv mv mv mv mv mv mv mv mv v v db : sec ma ma o c : sec v in v in v out a v out a v in a v out a i out a v i sc + i sc - min -- -- 0.4 -- 2.47 2.45 2.82 2.79 4.95 4.90 -- -- -- -- -- -- -- -- -- -- -- 60 -- -- 800 -- -- -- svr1118-2.5 svr1118-2.85 svr1118-5 svr1118-2.5 svr1118-2.85 svr1118-5 svr1118-2.5 svr1118-2.85 svr1118-5 typ 0.6 1.0 1.4 1.4 2.5 2.5 2.85 2.85 5.0 5.0 -- -- -- -- -- -- -- -- -- 0.85 1.0 80 5 5 1200 -700 170 50 v in = 5v v in = 0v input low level input high level no load all operating conditions 5/ no load all operating conditions 5/ no load all operating conditions 5/ (4.2v # v in # 15v) (4.75v # v in # 15v) (6.5v # v in # 20v) (0 # i out # 800ma) (-400ma # i out # 0) (0 # i out # 800ma) (-400ma # i out # 0) (0 # i out # 800ma) (-400ma # i out # 0) (i out = 100ma) (i out = 800ma) (f ripple = 120hz, v ripple = 0.5v p-p , a v=2v) (0 # i out # 800ma) (-400ma # i out # 0) (v out = 0) (v out = v in ) no load no load t o * * * * 25 * 25 * 25 * * * * * * * * * * 25 25 25 25 25 25 notes: * full temperature range 1/ for ordering information, price, and availability contact fac- tory. 2/ screening per mil-prf-19500. 3/ for package outlines and lead bend options contact factory 4/ unless otherwise specified, testing done at v cc = 5v (for svr1118-2.5 and svr1118-2.85) and at v cc = 7v (for svr1118-5); c load = 1 : f; i load = 0. 5/ all operating conditions include the combined effects of load current, input voltage, and temperature over each parameters full range. 6/ load and line regulation are tested at a constant junction tem- perature by low duty cycle pulse testing. 7/ dropout voltage is defined as a minimum input to output voltage measured while sourcing the specified current.
|
